Find in stock:


Home > Gas Fire Pit Kits > Manual Electronic Ignition Fire Pit Kits > Manual Electronic Ignition Rectangular H or S Burner > 54X16in Manual Electronic Ignition Fire Pit Kit

Click to enlarge54X16in Manual Electronic Ignition Fire Pit Kit

FPPK-54X16$1,574.00
Choose your Burner: 
Gas Type: 
Add Lava Rock to this kit: 

This item comes with Free Shipping in the Continental US!

Our mid-range complete drop-in Fire Pit Kit comes fully assembled in Stainless Steel and is ready to be connected to 1/2 in gas line.
An easy to use Fire Pit at less than half the cost of our Remote Electronic Ignition Kits. This Kit utilizes a Safety Pilot thermopile to safely control gas flow. If there is no fire there will be no gas flow. It also includes a Manual Spark Igniter so there's no need for a standing pilot on all the time. Simply flip the ignition spark switch, depress the black knob for 30 seconds and enjoy!
(pictured is 30 X 12in kit. This kit has much larger burner and pan)

H Burner



Your choice of standard H Burner or our New S Burner Made of High quality 1/2" #304 Stainless Steel tubing. Both Burners have a center hub that is slightly raised to allow for shedding of water and allowing gas to be most concentrated with highest flames in the center of the burners. H burner holes are drilled at 30 degrees for an inward flame pattern. The S Burner ports are closer together for a distinct serpentine flame pattern.
S Burner





54X16in Manual Electronic Ignition Fire Pit Kit includes:

- 48in X 10in Stainless Steel H Burner 140K BTU or 48in S Burner 140K BTU max capacity


- 54in X 16in Rectangle 16 gauge Stainless Steel Bowl Burner Pan 2 1/2" deep with a 1.3" lip


- Flame Sensing Safety Pilot Kit with Manual Spark Ignition in Stainless Steel Valve Box


- Blowout box to protect thermopile and spark igniter from weather and debris.


- Stainless Steel piping and elbows to connect to your gas line



How It Works

Start Up:This is done by simultaneously pressing valve control knob to start flow of pilot gas and pressing ignition button for spark. Release spark after pilot ignition, release valve control knob after ~20 seconds. Then turn valve control knob counterclockwise to light main burner.
Operation: Flame height may be adjusted by turning valve control knob- counterclockwise provides more flame, clockwise lowers flame. If flame loss does occur, the system will automatically turn off all gas flow.
Shut Down:To turn OFF the fire pit simply turn valve control knob clockwise- slightly depress knob to reach OFF position.

Read a copy of Installation Instructions for FPPK Kits


Features

*Fully Assembled and ready to install. Control components are protected within valve box.
*Flex Line configuration provides versatile and simple installation.
*Start ignition with push button and valve control knob.
*Flame sensing- system will turn off gas if flame is lost.
*Flame height is adjustable using valve control knob.
*Battery Operated System- is perfect solution for installs with no power.
*Natural Gas or Liquid Propane: Factory built & tested for either fuel.
*CSA Certified in US and Canada to ANSI Z21.97-2014/CSA 2.41-2014 requirements.
*Optional Install: Control Box Sleeve for mounting in pavers, metal and more.


This Kit is certified CSA Compliant. Click logo
to read a copy of certification for this Kit


*All parts of this kit and approved media must be used to insure compliance. The Manufacturer recommends using 2 cubic ft. of lava rock.
















Site Map

Search this site:

 

 

Fireplace Accessory - Portable Gas Fire Pits
The Custom Fireplace, Fire Pits & Kits

For ideas on design and relaxation with fire pits please visit our showroom -
Firepit Showroom - Gallery
GasFireRing.com
- Stainless Steel, Black Iron, Round, Square and Rectangular Fire Rings

Contact Us
Phone: (770)967-0087
Email: thecustomfireplace@yahoo.com