Your choice of standard H Burner or our New S Burner Made of High quality 1/2" #304 Stainless Steel tubing. Both Burners have a center hub that is slightly raised to allow for shedding of water and allowing gas to be most concentrated with highest flames in the center of the burners. H burner holes are drilled at 30 degrees for an inward flame pattern. The S Burner ports are closer together for a distinct serpentine flame pattern.
Start Up:This is done by use of a wall switch or remote control (or smart phone on Hi/Lo Models. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame. Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence. Shut Down:To turn OFF the fire pit simply use wall switch remote control or smart phone.
Read a copy of Installation Instructions for EI On/Off Kits
Read a copy of Installation Instructions for EI Hi/Lo Kits
To veiw exact dimensions
*Fully Assembled- ready to install. Control components are protected within stainless steel valve box.
*Start via wall switch, remote or whole house system; Auto re-light if flame is lost.
*Ignition is complete using a robust and reliable Hot Surface igniter.
*On/Off models: Use with optional wall switch or Remote Control available.
*High/Low Flame Control Models: Adjust high setting to low setting- ~45% turndown (Remote Control and Smart Phone App included).
*120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet or 24vac typically used pool side or with other lower voltage requirements.
*Natural Gas or Liquid Propane: Factory built & tested for either fuel.
*Internal temperature monitoring with overheat auto shutoff.
*CSA Certified in US and Canada to ANSI Z21.97-2014/CSA 2.41-2014 requirements.(EI system already meets upcoming 2018 ANSI requirements)
*Optional Install & Controls: On/Off Remote, Timers and an Emergency Shutoff.
Download HPC Fire App for your High/Low Electronic Ignition Fire Pit. Many features including ON/OFF, High/Low, Timer and Heat Sensor. Available on Google Play or Apple iOS.
*All parts of this kit and approved media must be used to insure compliance. The Manufacturer recommends using 3 cubic ft of lava rock.
**This Kit should be covered when not in use to protect from rain and debris.
See the following chart for what accessories fit with this Fire Pit Kit and how much media to use
Deluxe Fire Pit Kits come fully assembled so it can be dropped in to a ready enclosure. This is our top-of-the-line system featuring ease of ignition with a wall switch, handheld remote or home automation system. Hot surface ignition system allows for control of flame as well as auto-relight if there is flame loss. This is our most advanced control system with numerous convenience and performance improvements for both On/Off Models and our new High/Low Models. High/Low features flame height control via our new remote or our new mobile app.