Unique Fire Places Created Everyday
(770) 967-0087 (M-TH 9-5 EST/FRI 9-4 EST)
Electronic Ignition Fire Pit Kit Linear 121X8in

Electronic Ignition Fire Pit Kit Linear 121X8in


Select Pan Style:
Select Size:
Select Control:
  • Description

  • Features

  • How it Works

  • Dimensions

  • "You May Also Like..."

  • Description

    121in X 8in Interlink Linear Electronic Ignition Fire Pit Kit includes:

    - High quality Stainless Steel 120in Stainless Steel Linear Burner 250K BTU with Innovative Raised Hub Technology

    - 121in X 8in Interlink Linear Rectangle Trough type 18 gauge 304 Stainless Steel burner pan w/ 1 1/2in deep sidewalls that provides the base for your pit kit.

    - Electronic Ignition System enclosed in 16 Gauge Stainless Steel Valve Box.

    *On/off System: Control with Wall Switch, (optional) Remote Control or your Smarthome system.

    *Standard 120VAC or 24VAC

    *Natural Gas or LP (Liquid Propane) version

  • Features

    *Our top-of-the-line system featuring ease of ignition with a wall switch, handheld remote or home automation system.
    *This Fire Pit Kit comes fully assembled so it can be dropped in to a ready enclosure.
    *Control components are protected within stainless steel valve box.
    *Hot surface ignition system allows for control of flame as well as auto-relight if there is flame loss.
    *120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet or 24vac typically used pool side or with other lower voltage requirements.
    *Natural Gas or Liquid Propane: Factory built & tested for either fuel.

    *Internal temperature monitoring with overheat auto shutoff.
    *This is our most advanced control system with numerous convenience and performance improvements for both On/Off Models and our new High/Low Models. High/Low features flame height control via our new included remote control or our new mobile app.
    *CSA Certified in US and Canada to ANSI Z21.97-2014/CSA 2.41-2014 requirements.
    *Optional Install & Controls: On/Off Remote, Timers and an Emergency Shutoff.

    *All parts of this kit and approved media must be used to insure compliance. The Manufacturer recommends using lava rock. Click here for the recommended amount for this kit.
    **This Kit should be covered when not in use to protect from rain and debris.
  • How it Works

    Start Up:
    This is done by use of a wall switch,(optional) remote control. If connected to smarthome or smart plug it can even be turned on and off with your voice using Alexa or Google home. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.

    While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
    Shut Down:
    To turn OFF the fire pit simply use wall switch, remote control or voice command to cut the power to the unit. After cool down, cover fire pit to protect from water and debris.

    Read a copy of Installation Instructions for EI On/Off Kits
  • Dimensions

  • "You May Also Like..."

Scroll to top