All of our Electronic Ignition Fire Pit models are factory tested and come complete with Stainless Steel Burners or Fire Rings, Stainless Steel Burner Pans, and Electronic Ignition System all enclosed in a Stainless Steel Valve Box. They can be configured for Natural Gas or LP(propane) and are designed to drop-in to your above ground enclosure.
Start Up:This is done by use of a wall switch or remote control (or smart phone on Hi/Lo Models). When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame. Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence. Shut Down:To turn OFF the fire pit simply use wall switch remote control or smart phone.
Read a copy of Installation Instructions for EI On/Off Kits
Read a copy of Installation Instructions for EI Hi/Lo Kits
*Fully Assembled- ready to install. Control components are protected within stainless steel valve box.
*Start via wall switch, remote or whole house system; Auto re-light if flame is lost.
*Ignition is complete using a robust and reliable Hot Surface igniter.
*On/Off models: Use with optional wall switch or Remote Control available.
*High/Low Flame Control Models: Adjust high setting to low setting- ~45% turndown (Remote Control and Smart Phone App included).
*120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet or 24vac typically used pool side or with other lower voltage requirements.
*Natural Gas or Liquid Propane: Factory built & tested for either fuel.
*Internal temperature monitoring with overheat auto shutoff.
*CSA Certified in US and Canada to ANSI Z21.97-2014/CSA 2.41-2014 requirements.(EI system already meets upcoming 2018 ANSI requirements)
*Optional Install & Controls: On/Off Remote, Timers and an Emergency Shutoff.
*More info on the app can be found on each product page that is A HI/LO and App Capable Model. If you need to decide which fire pit kit may be right for you please visit ourGas Fire Pit Information Page