Unique Fire Places Created Everyday
(770) 967-0087 (M-TH 9-5 EST/FRI 9-4 EST)
Electronic Ignition Fire Pit Kit 14in

Electronic Ignition Fire Pit Kit 14in


Select Pan Style:
Select Size:
Select Control:
  • Description

  • Features

  • How it Works

  • Dimensions

  • "You May Also Like..."

  • Description

    14 inch Flat Pan Electronic Ignition Fire Pit Kit includes:

    - High quality Stainless Steel 12in gas ring 90K BTU

    - 14in Flat Round 16 gauge Stainless Steel Burner Pan that provides the base for your pit kit.

    - Electronic Ignition System enclosed in 16 Gauge Stainless Steel Valve Box.

    *High/Low System: 2 step Flame Height Adjustment, Included Remote Control, Free Smartphone App to control and monitor the entire system

    *Standard 120VAC or 24VAC

    *Natural Gas or LP (Liquid Propane) version

  • Features

    *Our top-of-the-line system featuring ease of ignition with a wall switch, handheld remote or home automation system.
    *This Fire Pit Kit comes fully assembled so it can be dropped in to a ready enclosure.
    *Control components are protected within stainless steel valve box.
    *Hot surface ignition system allows for control of flame as well as auto-relight if there is flame loss.
    *High/Low Flame Control Models: Adjust high setting to low setting- ~45% turndown (Remote Control and Smartphone App included).
    *120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet or 24vac typically used pool side or with other lower voltage requirements.

    *Natural Gas or Liquid Propane: Factory built & tested for either fuel.
    *Internal temperature monitoring with overheat auto shutoff.
    *This is our most advanced control system with numerous convenience and performance improvements for both On/Off Models and our new High/Low Models.
    *CSA Certified in US and Canada to ANSI Z21.97-2014/CSA 2.41-2014 requirements.

    *All parts of this kit and approved media must be used to insure compliance. The Manufacturer recommends using lava rock. Click here for the recommended amount for this kit.
    **This Kit should be covered when not in use to protect from rain and debris.
  • How it Works

    Start Up:This is done by use of remote control or smart phone app on Hi/Lo Models. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
    Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
    Shut Down:To turn OFF the fire pit simply use remote control or smartphone app. After cool down, cover fire pit to protect from water and debris.

    Download HPC Fire App for your High/Low Electronic Ignition Fire Pit. Many features including ON/OFF, High/Low, Timer and Heat Sensor. Available on Google Play or Apple iOS.

    Read a copy of Installation Instructions for EI Hi/Lo Kits
  • Dimensions

  • "You May Also Like..."

Scroll to top